MULTI-COLUMN 26 27 July 2019 ANTHRACITE 0346 Zehnder Charleston A timeless decorative radiator that suits modern or traditional settings, the multicolumn is available from stock in a RAL 9016 white finish and stylish Anthracite textured finish, or to order from a range of 50 other colours. Wall supports and air vents are included. Stylish support feet are available if required. Find out more about LaZer made on page 32. HORIZON BLUE 0520 2 5 5-7 DAY 14 DAY 3-5 DAY 3-5 WEEKS 4-6 WEEKS 10 20 DAY 17 DAY 3-5 WEEKS 2 5 5-7 DAY 14 DAY 3-5 DAY 3-5 WEEKS 4-6 WEEKS 10 20 DAY 17 DAY 3-5 WEEKS 2 5 5-7 DAY 14 DAY 3-5 DAY 3-5 WEEKS 4-6 WEEKS 10 20 DAY 15 DAY 3-5 WEEKS Colour finish: Standard colours from the Zehnder colour chart including matt white finish are priced at: RAL 9016 + 25%. Colour finish and non-stock products delivery: 3-5 weeks. Central Heating Model STOCK listed in black Height mm Width mm Number of sections Finish Output ∆T=50K Watts/Btu All outputs certified to EN 442 RRP (ex VAT) Zehnder Charleston vertical 2180-6 1792 302 6 white 744/2539 £259 2180-8 1792 394 8 white 992/3385 £345 2180-10 1792 486 10 white 1240/4231 £431 2180-12 1792 578 12 white 1488/5077 £517 3180-6 1800 302 6 white 996/3398 £355 3180-8 1800 394 8 white 1328/4531 £473 3180-10 1800 486 10 white 1660/5664 £591 2180-8-0346 1792 394 8 anthracite 992/3385 £431 2180-10-0346 1792 486 10 anthracite 1240/4231 £539 2180-12-0346 1792 578 12 anthracite 1488/5077 £646 Model code breakdown: eg. 3180-8 - 3 (number of columns), 180 (180cm high) 8 (number of sections). 3 Column 4 Column 5 Column 6 Column 3 Column 3 Column 4 Column 5 Column 6 Column 3 Column You can use our Charleston packaging to protect your radiator whilst decorating. Instructions on the pack. Expect manufacturers marks on Charleston Technoline finish. See page 30 for more information. CHARLESTON Zehnder recommends VAL-SET-2-CR. For more information see page 52. *1 /2” air vent Width excludes air vent F = flow R = return H = height W = width Tube: Vertical \ 25mm All dimensions in mm Manufacturing tolerance of +/-0.6mm per section The complete compliant technical specifications can be found between pages 53 and 61.